【產品介紹】
iHeir-JS膠水防霉劑是一種高效、殺菌劑,適用于高分子聚合物乳液及各類水性粘合劑。亦可用于抑制細菌和真菌在生產和存儲膠水和其它含水有機產品中的滋生。iHeir-JS已經被廣泛用于大容量存儲乳液的抗菌防腐上。美國環境保護署(EPA)已批準登記iHeir-JS為水性膠水和涂料的罐內抗菌防腐劑。大量的實驗及實際應用證明iHeir-JS對丙烯酸、聚醋酸乙烯粘合劑、聚苯乙烯丁酯以及其它共聚物有極好的防霉防腐功能,并且與這些產品中的有機和無機物成分有著極好的相容性。
【iHeir-JS的特性】
主要化學成份:
異噻唑啉酮: 40%
異噻唑啉酮: 15%
【物理性質】
活性成份濃度:45%
粘度(25℃):3cps
外觀:透明無色液體
比重(25℃):1.02
氣味:柔和芳香味
溶解性 (水):可任意混溶
pH :6~7
溶解性(有機溶劑):溶于絕大多數有機溶劑

【iHeir-JS使用方法及用量】
1.iHeir-JS膠水防霉劑產品的供應形式為液體,易于混合。實驗證明iHeir-JS的防霉防腐效果不會因不同的加入點而受到影響。iHeir-JS可以直接在膠水研磨、包裝前或使用膠水前加入。為確保加入iHeir-JS后的均勻分散,必須將乳液和水性粘合劑充分攪拌(建議按1.0%-2.0%比例添加)。
2.配合微生物膠囊技術加工在包裝材料上,其活性成分的濃度取決于產品的大小或空間的大小。
【iHeir-JS作用原理】
1.切斷了霉菌賴以生存的食物來源(淀粉、蛋白質)
It cuts off the source of food(including starch) that mold relies on.
2.采用微膠囊技術,僅需微量添加,有防霉抗菌能力
It uses microcapsule technology, and it has excellent cleaning effect with little applicaiton.
3.阻止了白乳膠中微生物想產品轉移
It prevents microbe from transferring to the surface of the product in white latex.
4.上百種材料貼合,環保噴膠的廣泛應用證實,iHeir-JS具有廣譜的殺菌效果
The application of hundreds of material gluing and environmental protection spray ashesives has proved that iHeir -JS has broad-spectrum anti-mildew effect.
【包裝及貯存】
25和160公升兩種規格,請將iHeir-JS膠水防霉劑存放在常溫室內空氣流通處,請勿用無內襯的金屬容器來裝本品。在普通存儲溫度下,該產品最少有一年的穩定期。
適當地使用iHeir-JS較之使用其他殺菌劑有以下優點:
1. 廣譜抗菌作用:可同時抑制細菌(包括格蘭氏陰性、陽性細菌)和真菌(酵母菌、霉菌等)。
2. 成本低:成本(有效使用濃度)比一般市場上的抗菌防腐劑為低,且使用簡便。
3. 在建議濃度下使用,不含甲醛或甲醛釋放物。
4. 優異的物理及化學相容性,對成品無副作用。
5. 有效活性濃度低,對環境友好。
【注意事項】
Matters that Need Attention
請根據嚴格的流程使用本產品。
Operate in strict accordance with regulations.
避免與眼睛和皮膚接觸,佩戴防護衣,護目鏡以及橡膠手套。
Wear protective clothing, goggles, and rubber gloves.
如果不小心與皮膚接觸,立刻用肥皂和大量的水沖洗
If
it is in contact with the skin, wash immediaby with plenty of water and soap.
如果不小心濺入眼睛,立刻用用大量的清水沖洗。
If it splashes into the eyes, immediaby wash with plenty of water.
Important
statement: The customer's specific bula, raw
material, production process , production environment, and other factors are
not under the control of iHeir China Antifungal Technology Co., Ltd., which has
no guarantee of the final use effect in the customer’s bula, so we have no
commitment or liability for any quality dispute of the final product.