商鋪名稱：優聯電纜熔接技術（深圳）有限公司
聯系人：何經理（先生）
聯系手機：
固定電話：
企業郵箱：3326480758@qq.com
聯系地址：深圳市寶安區西鄉寶民二路728號
郵編：5210800
聯系我時，請說是在電子快手網上看到的，謝謝！
商品詳情
| XKT3系列電纜T接端子主要適用于建筑、工業電氣設備及特殊場合中作主電纜（干線）不能切斷時的“T”型支線連接用。該產品在繼承了JXT2系列T接端子的所有優點的基礎上突出了其密封性能，特殊設計的密封圈可滿足各種規格截面電纜的線徑匹配，其優異的防護性能大拓展了其應用范圍；同時在產品外形上進行更精心、更具突破性的工業設計，使其不僅具有纖小美觀的外形，同時更具有可靠緊湊的內部結構。該產品的推出提升了產品的密封性能使其不僅可應用室內，同時在進行密封灌膠處理后，更可應用在戶外，電纜溝，地下空中等對防護有特殊要求的場合。 The T terminals of JTX3 series cables are mainly used in building, industrial electrical equipment and special occasions to connect the main cable (trunk line) when it can not be cut off. The "T" shaped branch connection is used. The product is based on inheriting all the advantages of JXT2 series T terminal on the sealing perbance of the sealing ring, special design can meet the various specifications of cable diameter matching, its excellent protection perbance and expand the application range; at the same time, more carefully, more breakthrough of product in industrial design the appearance, not only has the delicate and beautiful appearance, but also has a compact structure and reliable internal. The introduction of this product improves the sealing perbance of the product, enabling it not only to be applied indoors, but also can be applied in outdoor, cable trench, underground air and other special occasions for protection. |
|
符合IEC60947-7-1，GB14048.7.1標準 實現不切斷主干線時的現場分支連接 實現銅或鋁導體的可靠連接，實現銅——鋁過度 外形美觀堅固，防護等級符合IEC 60529 IP54，經特殊密封處理防護等級可達IP68 現場接線時不用對線端作特殊處理，不用特殊工具，使用便捷，節省施工工時 線夾對導線包容型犬牙交錯結構，傳導截面大、接觸壓力大、接點壓降小，輔之以高強度螺栓壓接，防松抗震 |
| 型號Specification | XKT3-50(35) |
| 主線截面Main line | 10-50mm2 |
| 支線截面Branch line | 6-35mm2 |
| 壓線螺絲Screw | M8 |
| 力矩Torque | 18N·m |
| 剝線長度Strip length | 23mm |
| 外觀尺寸Dimension | 長45寬32高61mm |
|
打開防護罩，并擰開螺母取出導體 Open the shield and unscrew the nut Take out the conductor |
|
將主線與支線剝開適用長度 Peel off the length of the main line and the branch line |
|
先后將主線、導體、支線、螺栓螺母放入支架，并擰緊螺母 Successively the main line, the conductor, the branch line, the bolt, the nut is placed in the bracket, and the nut is tightened. |
|
蓋上防護罩并擰上外殼4個螺絲 完成安裝 Cover the shield and screw the 4 screws on the shell to complete installation |
|
外殼采用全新尼龍材料， 搭配純銅導體及金屬固定螺桿 |
|
大電流接觸穩定，可以用于五芯電纜快速T接 |
|
大量用于建筑樓盤供電分支，設計合理、質量可靠 |
在線詢盤/留言
